|
|
| |
|
|
 |
The Phenomenator diffuser from
Metal*Aire® acts as a
powerful engine that mixes large quantities of room air into the supply
air jet. Stagnant regions of non-circulated room air are all but
eliminated. The powerful jet discharged from the Phenomenator also
minimizes the floor-to-ceiling temperature difference making this diffuser
an excellent choice for maximum occupant comfort. The high induction
core technology provides the maximum level of room air mixing in both
cooling and heating applications. |
|
|
|
|
|
|
-
 The
highest induction ratio of any commercial air diffuser
available.
-
Excellent selection for providing exceptional
comfort especially in executive offices, conference rooms, and
board rooms.
-
Can improve productivity by maintaining
draft-free comfort in applications such as open office plans,
work areas, and reception areas.
-
Designed for applications calling for minimal
temperature differences in a space.
-
Solves comfort problems in applications such
as reception areas and entranceways.
-
Architecturally pleasing design integrates
into the ceiling system.
-
Diffuser can be applied in critical
applications requiring minimal temperature gradients.
Now you have a choice when selecting an air
distribution device for perimeter heating applications. Up
until now, the only effective way to heat a perimeter zone was
with a plenum slot or linear slot diffuser located at the
perimeter. The new Phenomenator diffuser performance allows
you to use a ceiling diffuser to provide the mixing required to
obtain extremely high levels of comfort, even in cold
climates. In independent tests conducted at an independent
Air Distribution Test Laboratory, the diffusers produced an ADPI
value of over 95. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For more detailed information and pricing on the Metal*Aire®
Phenomenator please contact the nearest Buckley Associates, Inc.
branch office:
|
|
|
|
|
|
|
|
*This information was compiled from
Metal*Aire's®
product literature on the Phenomenator. It is used with permission
and may not be reproduced. (c) 2001 Metal Industries, Inc.
|
|
|
|
|
|
|
|
|
|
© Copyright 2007 Buckley Associates, Incorporated
All Rights Reserved.
|
|
|
|
|
|